epD‐BfS‐ () Environmental Product  Schweizerischer ingenieur‐ und Architektenverein (SiA). () Merkblatt energieausweis für Gebäude gemäß Sn en und Sn en zurich.  Schweizerischer . Flash point: > 21° C „Beschichtung auf Zink und verzinktem Stahl“ from Bundesausschuss Farbe und Sachwertschutz (BFS) according to Merkblatt 5 of BFS. Flash point: > 21° C. Solid substance: approx. 55% Zinc and galvanized surfaces are to be prepared according to Merkblatt 5 of. BFS. Clean the surfaces to be painted and remove dirt of all kinds, including dust, mortar droppings, and similar.
|Published (Last):||18 May 2013|
|PDF File Size:||11.3 Mb|
|ePub File Size:||10.20 Mb|
|Price:||Free* [*Free Regsitration Required]|
Sylitol® NQG: Caparol
Then use Capatox or FungiGrund and allow to dry. Coating merbklatt such surfaces must be considered a risk for which we cannot accept responsibility, since even after the most thorough treatment the efflorescence may recur. Alternatively the application of a restorative render system is a good and prolonged solution e. Lower temperatures and higher humidity extend the drying time.
Allow wet cleaned surfaces to dry well before further treatment.
Possibly a second finishing coat may be necessary. Advice for allergy sufferers with isothiazolinone allergy: We will describe appropriate working methods, if mrekblatt substrate not specified above is to be coated. Jointing must be free of cracks. Use P2 dust filter for grinding. We will describe appropriate working methods, if a substrate not specified above is to be coated.
Lower temperatures and higher relative humidity extend the drying time. An additional priming coat of CapaGrund Universal must merblatt applied.
Then use Capatox or FungiGrund and allow the surface to dry thoroughly. Customer Service Centre Tel.: If other cleaning methods are used washing, wire brushing, hosing with waterprime with Dupa-grund or use AmphiSilan-Putzfestiger on EPS thermal insulation boards.
Therefore a life-long and invisible crack covering treatment by paint material cannot generally be guaranteed.
Prime chalking, sanding, absorbent surfaces with Dupa-grund. Self-tinted product should be prepared in advance and thoroughly mixed in order to avoid noticeable colour differences. Merkblaft not use on calcareous substrates and lightweight renders. In case of contact with eyes or skin, immediately and thoroughly rinse merkblatf water. Carefully remove to the stable substrate abrade, brush off, scrape off, use high-pressure water jet in compliance with the regulations, or by other suitable means.
Particular attention should be made to removing wastage from site in compliance with standard construction site procedures.
Facing Brickwork with Joint Cracks: Clean by suitable means, e. An empirical analysis of transaction data. Highly CO 2 permeable. Long Distance Travel Mer,blatt Simulation. Clean utensils immediately after use with soap and water.
Prime chalking, sanding, absorbent surfaces with AmphiSilan-Putzfestiger. Maximum temperature for high-pressure water jet: Apply one priming coat of product, diluted to a max. Lower temperatures and higher humidity extend the drying time.
Note As usual for facade paints, Cap-elast system products must not be applied in direct sunlight or on sun heated surfaces, during strong wind, fog or rain, high relative humidity, imminent rain or impending night frost. Keep out of reach of children. Maximum temperature for high-pressure water jet: